Previous Table of Contents Next

 

MAXTOR CORPORATION

MAXTOR 250837, 251005, 251340

Interface: IDE 44-PIN
Size: 2.5 in. 0.5 in. height
View: Bottom

DRIVE CONFIGURATION - J2
Selection Pins 1 & 2 Pins 3 & 4 Pins 1 & 3 Pins 2 & 4
Single drive only closed open N/A N/A
Single drive only open open open open
Master drive in a two drive system closed open N/A N/A
Master drive in a two drive system open open open open
Slave drive in a two drive system open closed N/A N/A
Drive configuration determined by Cable Select N/A N/A open closed

 

MAXTOR 71000A, 71050A, 71050AT, 71084A, 71084AP, 71260A, 71260AP, 71626A, 71626AP, 7541A, 7541AP

Interface: IDE(AT)
Size: 3.5 in. third height
View: Bottom

DRIVE CONFIGURATION
Setting J20 J24
Single drive in a system closed open
     Master drive in a two drive system closed open
     Slave drive in a two drive system open open
     Cable select open closed

 
USER CONFIGURABLE SETTINGS
Function Location Setting
Factory configured - do not alter J21 open
Factory configured - do not alter J22 open
Write Cache enabled J23 open
     Write Cache disabled J23 closed

 
MISCELLANEOUS TECHNICAL NOTES
A spare shunt, which is placed horizontally over J23 and J24 is shipped with the drives.

 

MAXTOR 71350AP/A, 71687AP/A, 72025AP, 72577AP, 72700AP, 80875A, 81312A, 81750A, 82187A, 82625A, 83062A, 83500A

Interface IDE(AT)
Size 3.5 in. third height
View Top

DRIVE CONFIGURATION
Setting J48 J50
Single drive only open closed
     Drive is master in two drive system open closed
     Drive is slave in two drivesystem open open
     Master/Slave determined by Cable Select closed open

 
USER CONFIGURABLE SETTINGS
Function Label Position
Write Cache enabled J46 open
     Write Cache disabled J46 closed
Factory configured - do not alter J44 open
4092 Cylinder Option disabled J42 open
     4092 Cylinder Option enabled J42 closed

 
Previous Table of Contents Next