Previous Table of Contents Next

 

QUANTUM EUROPA 540AT, 810AT, 1080AT

Interface: Fast ATA-2
Size: 2.5 in. forth height (810AT, 1080AT)
2.5 in. fifth height (540AT)
View: Bottom

DRIVE CONFIGURATION
Selection CS DS SP
Single drive in a system open closed open
Master drive when slave does not support PDIAG/DASP open closed closed
Slave drive in a system open open open
Master/slave is configured by cable select closed open open

 

QUANTUM FIREBALL TM 1.0AT, FIREBALL TM 1.2AT, FIREBALL TM 2.1AT

QUANTUM FIREBALL TM 2.5AT, FIREBALL TM 3.2AT, FIREBALL TM 3.8AT

Interface: Fast-ATA-2
Size: 3.5 in. third height
View: Bottom

DRIVE CONFIGURATION
Selection CS DS SP
Drive is master open closed open
     Slave drive in a two drive system open open open
     Master drive when slave drive does not use DASP open closed closed
     Cable Select closed open open
Note: Cable select requires special cable and for both drives on the interface to support this feature.

 
MISCELLANEOUS TECHNICAL NOTES
The TM series has an extra jumper (PK) that is used to store a spare jumper.

 

QUANTUM GRAND PRIX XP32151S, XP34301S

Interface: SCSI
Size: 3.5 in. half height
View: Bottom

DRIVE SELECTION
Drive number A0 A1 A2
0 open open open
1 closed open open
2 open closed open
3 closed closed open
4 open open closed
5 closed open closed
6 open closed closed
7 closed closed closed

 
USER CONFIGURABLE SETTINGS
Function Location Setting
Spindle motor starts on power-up WS open
     Spindle motor starts on command only WS closed
SCSI parity check enabled EP closed
     SCSI parity check disabled EP open
Self seek test disabled SS open
     Self seek test enabled SS closed
Spindle motor delay disabled DS open
     Spindle motor delay enabled (8 sec. x SCSI ID #) DS closed
On-board TERMPWR enabled TE closed
     On-board TERMPWR disabled TE open
Reserved - to be used later RAID N/A
Factory configured - do not alter PF open
Note: A blinking LED during the self-seek test is an indication of drive error.

 
MISCELLANEOUS TECHNICAL NOTES
All other jumpers and their significance are unidentified.

 

QUANTUM LIGHTNING 365AT, 540AT, 730AT

QUANTUM MAVERICK 270AT, 540AT

QUANTUM PRODRIVE ELS 42AT, 85AT, 127AT, 170AT

QUANTUM PRODRIVE LPS 120AT, 127AT, 170AT, 210AT, 240AT, 270AT, 340AT, 420AT, 540AT

Interface: IDE(AT)
Size: 3.5 in. half height
3.5 in. third height (LPS)
View: Bottom

DRIVE CONFIGURATION
Selection DS SP
Single drive only closed open
     Master drive in a two drive system closed closed
     Slave drive in a two drive system open open
Note: When jumper SP is "closed" in slave mode the drive will perform a self test in seek mode.

 
USER CONFIGURABLE SETTINGS
Function Location Setting
Drive order is set by jumpers DS & SP. CS open
     Drive order is set by pin 28 of the AT interface. CS closed

 
MISCELLANEOUS TECHNICAL NOTES
PO is a product options set of jumpers and are not used.
ELS drives do not have this jumper.

 
Previous Table of Contents Next